Tiles being set in a bathroom: a notched trowel combing mortar on a floor with a row of large gray tiles and spacers
Our process

How we work, from the first call to the final grout line.

Six plain steps with a Free Tile Estimate, a written breakdown, careful prep and tidy finishing. You always know what we are doing, why and what comes next.

A phone with a blank screen, a coffee cup, a notepad and tile samples on a table in morning lightStep 1
Step 1

Call and describe the job

You tell us about your project, the rooms, the tile you like and your timing. We ask a few questions, give you early guidance and set the details.

A tape measure stretched across a bathroom floor with a moisture meter and a level beside itStep 2
Step 2

Measure and plan

We check flatness, moisture and layout from photos or a visit and talk through materials, pattern, trim and your schedule.

A table covered with tile samples in many colors, grout color cards and a blank layout sketch in soft lightStep 3
Step 3

Review the estimate

You review a plain written estimate with the prep, the waterproofing, the tile and setting materials, the grout and sealing and the schedule with cure times.

A bathroom with old tile removed and a bare clean concrete floor being leveled, a bucket and a trowelStep 4
Step 4

We prepare the surfaces

Old tile comes out, floors are repaired and leveled, backer board and membranes go in and showers are waterproofed and tested before any tile is set.

Tiles being set in a bathroom: a notched trowel combing mortar on a floor with a row of large gray tiles and spacersStep 5
Step 5

We set the tile

Tile is set with the right mortar, checked for flatness and alignment and cut carefully so edges, corners and transitions look finished.

A finished tiled bathroom wall and floor with clean even grout lines and a soft sponge and a bucket beside it in soft morning lightStep 6
Step 6

Grout, seal and walk through

We grout, seal and caulk, clean up and walk the finished job with you, leaving written care tips and extra tile for the future.

Questions

Before you start.

Is the estimate really free?

Yes. The Free Tile Estimate comes with no obligation. You see the scope, the materials and the schedule in writing before anything is ordered or started.

What areas do you serve?

Nashville and nearby communities across Middle Tennessee, including Franklin, Brentwood, Hendersonville, Mt. Juliet, Smyrna and more. See the service areas page for the full list.

What do you do?

Tile installation and repair for homes, builders and businesses, plus planning help, layout design, grout and sealing and care guidance.

Can I hire you for a small project?

Yes. Many calls are for a backsplash, a small bathroom or a few cracked tiles, and we welcome them.

How long does a bathroom tile project take?

It depends on the scope. Demolition, prep, waterproofing, tile and grout each take time, and cure times add days between steps. We give you a written schedule.

When can I use my shower?

After the grout and sealer cure, usually a few days. We tell you the exact timing for the materials we use.

How early should I order tile?

As early as you can. Special orders can take weeks, and an early order keeps the project on schedule.

Free Tile Estimate

Ready for tile done right?

Call us and describe your project. We will measure, check the surfaces and give you a clear written estimate.

Call NowFree Estimate