Grout replacement and regrouting that removes cracked, stained or crumbling grout and replaces it with fresh, matched grout for a like-new look.
Often it is the grout, not the tile, that makes a floor or shower look tired. Grout cracks, stains, crumbles and gets moldy long before tile wears out. Regrouting is a way to renew a room without replacing tile. Homeowners in Nashville call us when shower grout turns dark, when floor grout wears down and when a bathroom just needs a refresh.
We rake out old grout to a safe depth with the right tools, vacuum the joints and inspect the tile and edges. If the tile is loose or cracked, we point it out and plan repairs. We then choose a grout color and type, such as a cement-based grout or a stain-resistant epoxy, and fill the joints cleanly. After curing, we seal grout where it is needed and show you how to care for it. In showers, we also replace caulk at corners, since failing caulk is a common source of leaks. Send photos of your grout, including the worst spots, and tell us whether you want a similar color or a change. Samples help, because grout looks different dry. If you have extra tile, tell us where it is stored in case we find a loose or cracked piece.
Raked to a safe depth.
Loose or cracked tile spotted first.
Cement or epoxy by room.
Flexible joints refreshed.
Drag the handle to compare.
BeforeAfterRaked out to a safe depth.
Loose or cracked tile spotted first.
Cement-based or epoxy by room.
Joints filled and wiped neatly.
Flexible joints refreshed.
Protection explained for your grout.
Every topic has its own page with what to expect and how we approach it.
Comparison guideGrout Types ComparedHow cement-based, epoxy and urethane grouts differ in stain resistance, flexibility, color, working time and cost of care.Learn more 
Comparison guideTile and Grout CareA simple routine for cleaning tile and grout safely, which products to avoid and how to deal with…Learn more 
Comparison guideShower Waterproofing ComparedHow sheet membranes, liquid membranes and traditional liners differ in installation, details and what each asks of the…Learn more Pick the project and options to see a typical sequence from estimate and ordering to prep, setting, grout and finishing, with cure times.
You tell us the rooms, the tile you like and your timing, and we ask about the floors, walls and any water issues.
We check flatness, moisture and layout from photos or a visit and talk through materials, pattern and trim.
You get a plain written scope with prep, waterproofing, materials, schedule and cure times before anything is ordered.
Old tile comes out, floors are repaired and leveled, backer board and membranes go in and showers are waterproofed and tested.
Tile is set with the right mortar, checked for flatness and alignment and cut carefully at the edges.
We grout, seal and caulk, clean up and walk the finished job with you, leaving written care tips and extra tile.
Cracked, crumbling, stained or moldy grout that does not clean up are good signs.
We get close with samples. Old grout often fades, so a fresh match can look slightly different.
Removing old grout creates dust, so we use vacuums and protect the room.
Usually after the grout cures, often a day or more, depending on the product.
It resists stains well and suits showers and kitchens. We explain pros and cons.
Epoxy GroutEpoxy grout installation for showers, kitchens and commercial floors, with stain-resistant, durable joints placed carefully by experienced hands.Explore 
Grout Sealing and ColorGrout sealing and color restoration that protects cement grout from stains and renews faded or uneven grout lines…Explore 
Caulk ReplacementCaulk and sealant replacement at tub edges, shower corners and floor joints, using the right flexible products so…Explore 
Grout CleaningGrout and tile cleaning that lifts built-up grime, soap scum and stains with the right cleaners and tools…Explore Tell us about your project and we will call you back to set up a visit.
Or call (615) 357-7797 to talk now.
