Heated tile floors with electric mats or cables set under tile, a floor sensor and a thermostat, coordinated with an electrician so winter mornings feel warm.
Tile is durable and beautiful, but it can feel cold on a winter morning. A radiant heating system under the tile solves that, and it is one of the nicest upgrades in a bathroom or kitchen. Homeowners in Nashville add it when they are already replacing the floor, because the best time to install heat is before the tile goes down.
Most residential systems use a thin electric mat or cable set in a layer of mortar or self-leveling material. A floor sensor and a thermostat control the temperature, and a qualified electrician connects the system to power. We plan the layout around fixtures so heat is where your feet will be, test the system before and after tile, and explain how to use it. Because the system sits in the floor, the prep and the tile setting have to be done carefully to protect the wiring. Decide early where heat should and should not go. Under a tub, a toilet base or cabinets is wasted, while the walking path and the area in front of the sink is where you will feel it. Ask your electrician about the circuit, and bring the thermostat style you prefer so we can plan the wiring path.
The best time to add warmth is during replacement.
Heat under feet, not cabinets.
Before and after the tile is set.
Thermostat and sensor made simple.
Drag the handle to compare.
BeforeAfterHeat goes in before the floor is set.
Heat where you stand, not under cabinets.
Checked before and after tile.
Power and thermostat handled by the right trade.
Tile bedded without damaging the wiring.
A thermostat and floor sensor explained.
Every topic has its own page with what to expect and how we approach it.
Comparison guideHeated Floors Under TileHow electric mats and cables warm a tile floor, what a thermostat and sensor do and what to…Learn more 
Comparison guideFloor Prep and LevelingWhy tile needs a flat, clean, sound base, how flatness is checked and how leveling compounds and grinding…Learn more 
Comparison guideTile Size and Grout LinesHow mosaics, standard tile and large-format tile change the look, the grout lines, the installation and the cleaning.Learn more Pick a shower, floor, backsplash, patio or repair project, set the area and add allowances like leveling, waterproofing and heated floors to see a ballpark planning range. Placeholder values only.
You tell us the rooms, the tile you like and your timing, and we ask about the floors, walls and any water issues.
We check flatness, moisture and layout from photos or a visit and talk through materials, pattern and trim.
You get a plain written scope with prep, waterproofing, materials, schedule and cure times before anything is ordered.
Old tile comes out, floors are repaired and leveled, backer board and membranes go in and showers are waterproofed and tested.
Tile is set with the right mortar, checked for flatness and alignment and cut carefully at the edges.
We grout, seal and caulk, clean up and walk the finished job with you, leaving written care tips and extra tile.
Not easily. Heat is installed under the tile, so it is best added when the floor is replaced.
Usage depends on size, insulation and settings. A thermostat helps you control it.
Tile and grout handle gentle heat well when installed as directed by the maker.
A qualified electrician connects the system. We coordinate timing with them.
It depends on the system and the floor, so we explain what to expect for your setup.
Bathroom Floor TileBathroom floor tile installation with proper prep, a flat surface and tile choices that grip when wet and…Explore 
Kitchen Floor TileKitchen floor tile installation that stands up to dropped pans, spills and heavy foot traffic while matching cabinets…Explore 
Floor Prep and LevelingFloor prep and leveling that makes concrete and wood subfloors flat, clean and ready for tile, using grinding…Explore 
Tile FlooringTile flooring installation for kitchens, halls, living areas and whole homes, with flat prep, careful layout and grout…Explore Tell us about your project and we will call you back to set up a visit.
Or call (615) 357-7797 to talk now.
