Caulk and sealant replacement at tub edges, shower corners and floor joints, using the right flexible products so moisture stays out of walls and floors.
The caulk lines in a tiled shower do a lot of work. They are the flexible joints where walls meet each other, the floor and the tub, and they keep water out where grout cannot. When caulk cracks, peels or grows mold, water can reach the wall behind. Homeowners in Nashville call us when a shower begins to look worn at the corners, because replacing caulk is a quick fix that prevents big problems.
We remove the old caulk completely, clean the joint and let it dry, then check what is behind it. If we find softness or damage, we explain next steps. We choose a flexible sealant made for tile and bathrooms, tool it neatly and let it cure before water use. We also replace grout in corner and change-of-plane joints with caulk, since grout cracks where surfaces move. Matching colors keep the work discreet, and we explain the curing time and care. Take photos of the corners and joints, including any dark spots or gaps. Plan to avoid showers for the cure time after we finish. Choose a caulk color that matches your grout, and ask us about mildew-resistant products that are made for wet rooms.
Joints cleaned and dried.
We look behind the joint.
Sealants made for tile and baths.
When water use is safe again.
Drag the handle to compare.
BeforeAfterJoints cleaned and dried.
We look behind the joint for problems.
Sealants made for tile and baths.
Clean, even lines.
Caulk where surfaces move, not grout.
When water use is safe again.
Every topic has its own page with what to expect and how we approach it.
Comparison guideShower Waterproofing ComparedHow sheet membranes, liquid membranes and traditional liners differ in installation, details and what each asks of the…Learn more 
Comparison guideTile and Grout CareA simple routine for cleaning tile and grout safely, which products to avoid and how to deal with…Learn more 
Comparison guideGrout Types ComparedHow cement-based, epoxy and urethane grouts differ in stain resistance, flexibility, color, working time and cost of care.Learn more Pick the project and options to see a typical sequence from estimate and ordering to prep, setting, grout and finishing, with cure times.
You tell us the rooms, the tile you like and your timing, and we ask about the floors, walls and any water issues.
We check flatness, moisture and layout from photos or a visit and talk through materials, pattern and trim.
You get a plain written scope with prep, waterproofing, materials, schedule and cure times before anything is ordered.
Old tile comes out, floors are repaired and leveled, backer board and membranes go in and showers are waterproofed and tested.
Tile is set with the right mortar, checked for flatness and alignment and cut carefully at the edges.
We grout, seal and caulk, clean up and walk the finished job with you, leaving written care tips and extra tile.
Surfaces move at corners and grout cracks. Flexible caulk handles movement.
When it cracks, peels or grows mold. Many bathrooms need it every few years.
Not well. Removing the old caulk gives a better bond and a cleaner look.
Yes. The joint must be clean and dry for the sealant to bond.
Often a day, depending on the product. We tell you for yours.
RegroutingGrout replacement and regrouting that removes cracked, stained or crumbling grout and replaces it with fresh, matched grout…Explore 
Shower MaintenanceShower and grout maintenance that keeps tiled showers clean, mold-free and watertight with simple daily habits and periodic…Explore 
Tub SurroundsTub surround tile that covers the wall around a bathtub with waterproofed backing, clean corner details and a…Explore 
Water Damage RepairWater damage tile repair that opens damaged areas, dries and replaces backing and framing, rebuilds waterproofing and sets…Explore Tell us about your project and we will call you back to set up a visit.
Or call (615) 357-7797 to talk now.
