Laundry and utility room wall tile that protects walls from splashes and steam, in simple, wipeable layouts that add color to a hard-working space.
Laundry rooms and utility spaces get wet, dirty and messy, and the walls take part of the abuse. Tile behind a utility sink or a washer protects the drywall and wipes clean in seconds. Homeowners in Nashville also like to add a splash of color to a room that is usually plain, and tile makes the space more pleasant to work in.
We plan wall tile around the sink, the machines, shelves and outlets. Half-height tile with a trim cap is common, and tile behind the sink and the washer hookups protects the areas that see the most water. We choose a tile with a wipeable glaze and a grout that resists stains. Backing and sealing behind tile near hookups are important, so leaks do not damage the wall. Simple layouts with fewer cuts keep the project efficient and the look clean. Photograph the area behind the machines and the sink, and note the height of the shelves and cabinets. Decide whether you want the tile to stop at a rail or run to the ceiling. A light, glossy tile reflects light and makes a small room feel brighter.
Tile where water reaches.
Surfaces that clean quickly.
Half-height tile finished neatly.
Valves and outlets planned.
Drag the handle to compare.
BeforeAfterTile where water actually reaches.
Surfaces that clean in seconds.
Half-height tile finished neatly.
Layout planned around valves and outlets.
Colors and types that stay clean.
Walls prepared for wet areas.
Every topic has its own page with what to expect and how we approach it.
Comparison guideGrout Types ComparedHow cement-based, epoxy and urethane grouts differ in stain resistance, flexibility, color, working time and cost of care.Learn more 
Comparison guideTile Size and Grout LinesHow mosaics, standard tile and large-format tile change the look, the grout lines, the installation and the cleaning.Learn more 
Comparison guidePorcelain, Ceramic and StoneHow the three main tile families differ in density, water absorption, wear, care and the looks they offer.Learn more Pick the space and the conditions to see which tile format, grout joint and finish usually fit, with notes on flatness and grip.
You tell us the rooms, the tile you like and your timing, and we ask about the floors, walls and any water issues.
We check flatness, moisture and layout from photos or a visit and talk through materials, pattern and trim.
You get a plain written scope with prep, waterproofing, materials, schedule and cure times before anything is ordered.
Old tile comes out, floors are repaired and leveled, backer board and membranes go in and showers are waterproofed and tested.
Tile is set with the right mortar, checked for flatness and alignment and cut carefully at the edges.
We grout, seal and caulk, clean up and walk the finished job with you, leaving written care tips and extra tile.
It is not required, but tile behind sinks and machines protects walls and cleans easily.
Many people tile to chair-rail height or full height behind the sink. We help you decide.
Glazed ceramic or porcelain is easy to wipe and resists stains.
Yes, with careful cuts around the box and sealed edges.
Not always, but it resists stains well in messy rooms.
Mudroom and Laundry TileMudroom and laundry room tile that stands up to wet boots, spills and heavy appliances, with practical finishes…Explore 
Subway Tile BacksplashesSubway tile backsplash installation in classic running bond, stacked, herringbone and vertical layouts, with crisp lines and grout…Explore 
Tile WainscotTile wainscot and chair rail installation that protects the lower wall in bathrooms, halls and kitchens, with trim…Explore 
Caulk ReplacementCaulk and sealant replacement at tub edges, shower corners and floor joints, using the right flexible products so…Explore Tell us about your project and we will call you back to set up a visit.
Or call (615) 357-7797 to talk now.
