Old tile removal and demolition that takes up worn floors and walls cleanly, protects the rest of the house and reveals what is underneath before new tile goes down.
Taking out old tile is dusty, loud and heavy work, and it is where surprises show up. Mortar beds, hidden damage and old adhesives all come to light. Homeowners in Nashville hire us to remove tile from floors, showers and walls so the new work starts on a clean, honest surface. We protect the house, control dust and tell you what we find before deciding how to proceed.
We start by protecting floors, doorways and furniture, sealing off vents and setting up dust control. Tile is removed with the right tools for the job, whether chisels for walls or floor scrapers for thin-set. In older homes, we ask about the age of the house and mention that testing for lead paint or asbestos-containing materials may be wise before disturbing old layers, and we follow your decisions. Debris is hauled away, the surface is cleaned and we walk through what we found and what it means for the new tile. Take photos of the tile, the grout and any visible damage before we start. Note the age of the house and any past remodels. If you plan to keep fixtures or cabinets, tell us in advance so we protect them. Clear the room of anything fragile before demolition day.
Floors, vents and doors covered.
Barriers and vacuums used.
Hidden damage explained before work continues.
Testing for old materials discussed.
Drag the handle to compare.
BeforeAfterFloors, vents and doors covered.
Barriers and vacuums used during removal.
Methods that avoid unnecessary damage.
Hidden damage explained before work continues.
Waste removed and surfaces cleaned.
Testing for old materials discussed.
Every topic has its own page with what to expect and how we approach it.
Comparison guideFloor Prep and LevelingWhy tile needs a flat, clean, sound base, how flatness is checked and how leveling compounds and grinding…Learn more 
ResourceEPA Lead-Safe RenovationThe federal environmental agency page on lead-safe work practices for renovation, repair and painting in older homes.Learn more ResourceOSHA Silica SafetyThe federal workplace safety agency page on respirable crystalline silica, which can be released when cutting tile, stone…Learn more Tick what you notice about your floor, wall or shower, from bounce and cracks to dampness and old adhesive, to see what to check before tile.
You tell us the rooms, the tile you like and your timing, and we ask about the floors, walls and any water issues.
We check flatness, moisture and layout from photos or a visit and talk through materials, pattern and trim.
You get a plain written scope with prep, waterproofing, materials, schedule and cure times before anything is ordered.
Old tile comes out, floors are repaired and leveled, backer board and membranes go in and showers are waterproofed and tested.
Tile is set with the right mortar, checked for flatness and alignment and cut carefully at the edges.
We grout, seal and caulk, clean up and walk the finished job with you, leaving written care tips and extra tile.
A small bathroom often takes a day or two. Floors and showers vary with the mortar bed and size.
Sometimes, if it is flat and firmly attached. We check first and tell you honestly.
It creates dust, so we use barriers and vacuums to protect the rest of the house.
We stop, show you what we found and explain repair options and cost effects.
We suggest testing for older homes and follow your decision and local rules.
Floor Prep and LevelingFloor prep and leveling that makes concrete and wood subfloors flat, clean and ready for tile, using grinding…Explore 
Subfloor RepairSubfloor repair and reinforcement that replaces soft or damaged plywood, adds blocking and stiffens floors so tile does…Explore 
Bathroom RemodelsBathroom remodeling with tile that coordinates demolition, repairs, waterproofing, tile work and finishing details so the whole project…Explore 
Backer BoardBacker board and underlayment installation that gives tile a stable, moisture-ready bed on walls and floors, with taped…Explore Tell us about your project and we will call you back to set up a visit.
Or call (615) 357-7797 to talk now.
